Kiddie amusement rides bumper car rides with attractive appearance

1.Bumper car battery liquid adding
1).New purchase bumper car batteries are new,turn on the battery bolt,adding water to each hole of the battery(adding the source liquid the first time) until it reaches the marked water level,as shown in figure:
2).Can not add exceed the highest water level, to prevent the corrosion of main control box and other parts caused by the battery liquid overflow because of too full charge, after adding the liquid, tightening battery bolts, waiting for 30 minutes ,then go on battery charging;

bumper car

3).Put the battery into the bumper car, use battery terminal line connect the batteries in series, "+" and "-" end respectively connect with the dodgem positive pole(red line ) and negative pole(black line), please pick up the positive firstly, as shown in figure:
4).Battery wiring all the screws must be tighten , otherwise it will affect the operation and the car battery service life.
Check again whether the battery bolts is tighten,battery wiring line is connected right,make sure the two batteries is connected in series,the red line connect the battery positive pole,and the black line connect the negative line.

bumper car rides

more information please inbox to me or call me .
Email:sales@chinaparkrides.com
Skype:chinaparkrides
Tel:86-15716483771